Leading 10 usual forklift crashes ， forklift procedure need to take notice of these issues ！.

Don't undervalue the forklift at work. If the operation is not good, there will be severe mishaps in minutes, and there are numerous mishaps entailing forklifts.

Situation 1: The forklift freight obstructed the driver's sight, and the individual in front might not be located, causing a rolling mishap.
Situation 2: In order to keep the balance of the forklift when raising hefty products, the staff members utilized their body weight as the weight, which nearly triggered casualties.
Case 3: The size of the forklift cargo exceeds the allowed width of the course and holds on the roadside shelf, which virtually creates an accident.
Case 4: Forklift is speeding up and surrender throughout a turn.
Situation 5: The forklift chauffeur did not observe the pedestrian, and the pedestrian did not observe the forklift.
Situation 6: The forklift raises the personnel illegally, the forklift motorist does not use the safety belt, the forklift lifter falls and the motorist is crushed when the forklift rolls over.
Situation 7: The forklift driver did not use a safety belt and dropped from the automobile when it surrendered and was crushed.
Forklift procedure need to focus on these issues ：.

Begin.
1. Prior to starting, observe the surroundings, and after verifying that there are no obstacles that impede the safety of driving, beep the horn first and then begin.
2. For automobiles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) scale must be safe before beginning.
3. When the forklift begins with a tons, the motorist should initially confirm that the tons is secure and reputable.
4. The start must be slow and stable.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground should be maintained 300mm-400mm, and the pole ought to be slanted in reverse. .
2. Do not lift the fork expensive when driving. When getting in and leaving the task website or while driving, beware that there will certainly be no obstacles overhead. When the lots is traveling, the fork has to not be raised too expensive, which will certainly affect the stability of the forklift. .
3. After unloading, the fork ought to be decreased to the regular driving setting before driving. .
4. When transforming, if there are pedestrians or vehicles nearby, the driving signal needs to be released first. High-speed sharp turns are forbidden. High-speed doglegs will create the lorry to lose lateral stability and tip over. .
5. When the forklift is downhill, it is purely restricted to turn off the flame and slide, and it is restricted to brake instantly while driving with loads unless there are special conditions.
6. When the forklift is running, it needs to comply with the website traffic rules in the manufacturing facility and must maintain a specific security range from the automobile ahead. .
7. When the forklift is running, the lots has to be in the lowest position that does not hinder the driving, and the gantry ought to be correctly tilted back. The tons shall not be raised except when piling or filling. .
8. The elevation of the lots have to not obstruct the motorist's view. In unique scenarios, when the product impacts the forward vision, drive at a low speed when turning around.
9. It is forbidden to activate the ramp, neither to drive throughout the ramp. .
10. The risk-free driving speed of the forklift in the factory area is 5 km/h, and it must drive securely at a reduced speed when entering the manufacturing workshop location. .
11. When the forklift is lifted, lifted or driven, it is restricted for personnel to depend on the fork to hold things and play a stabilizing function. .
12. If troubles are located, Electric Forklift Truck for Warehouse they will be repaired and reported in a timely way, and they will never run with diseases or conceal them.

filling and discharging.
1. When fork-loading items, the range between the two forks need to be changed as needed to make the lots of the two forks well balanced and not skewed, and one side of the item must protest the rack. .
2. It is forbidden to collaborate with a single fork or make use of a fork top or pull. In unique scenarios, safety indication should be established to remind surrounding pedestrians. .
3. In the process of packing and unloading products, the forklift must be stopped with the brake. .
4. The speed of the automobile should be slow-moving and stable. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled items and hurt individuals. .
5. When utilizing a fork to fork the goods, the fork needs to be as deep as possible under the load, and it must be kept in mind that the fork suggestion need to not touch other products or items. The load ought to be maintained with very little back tilt of the gantry so that the lots does not glide backwards. The pole can be slanted forward somewhat when the Stand-on Electric Pallet Stacker lots is decreased to allow for simple positioning of the load and extraction of the forks. .
6. It is prohibited to fork items at high speed and hit tough objects with the fork head. .
7. When the forklift is working, it is restricted for people to loaf the fork, so regarding avoid the collapse of the goods and injure people. .
8. Overwhelming is forbidden, and it is banned to use forks to lift workers to participate in high-altitude procedures to stay clear of high-altitude dropping crashes. .
9. It is not allowed to use the brake inertia to slip, put, round or roll things. .
10. It is not permitted to make use of forks to pick, turn pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the products on the fork impend. Prior to leaving the forklift, you have to dump the goods or reduced the fork structure.
2. Draw the parking brake deal with to dead or depress the emergency brake switch.
3. The engine is shut off and the power is removed. (Except for unique circumstances, such as the chauffeur does not leave the car's line of vision and does not surpass 1 minute).
4. Remove the key. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look must be inspected, and fuel, lubricating oil and air conditioning water should be added.
2. Check the safety efficiency of beginning, running and stopping.
3. Inspect whether the lights and horn signals are complete and reliable.
4. Throughout the operation of the forklift, check whether the pressure and temperature are regular.
5. After the forklift is running, the outside leakage should additionally be examined and the seals must be replaced in time.

Forklift Safety Operation Specifications.
1. You must examine before leaving the automobile;.
2. When you experience a person before you during driving, you need to send out a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the low point of the freight ought to be 0.3 m ~ 0.4 m above the ground;.
5. The transforming need to not be too sharp to stop the tendency of " cost-free switching";.
6. Adding and down the slope needs to be sluggish and uniform, and no activating the slope is permitted.
7. Do not drive across the slope. When the gradient is greater than 10%, the lorry ought to be driven backwards when going downhill;.
8. When the forklift workers carry the goods and move on, if they come across large or hefty goods and go to the vehicle driver's line of vision, they need to take the reversing workout
.
The "Eight Prohibitions" should be complied with in the procedure.
1. Single fork procedure is not permitted.
2. It is not allowed to raise the goods for long distance driving.
3. It is not enabled to grab the goods by turning over the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not allowed to utilize inertia pressure to grab the goods.
6. It is not allowed to make use of braking force to expatriation round or easy-to-roll things.
7. It is not allowed to bring people to service the pallet or fork, and it is purely forbidden to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Car parking is not allowed under the list below conditions.
1. Curves, narrow roads, train crossings;.
2. Areas with a longitudinal incline greater than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the section with the exact same size as the barrier need to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844